如下為我司愛澤工業IZE-Industries常備庫存ABB相關產品，歡迎索取樣本資料和產品信息。

    
ABB火檢光纖SF810-FO-G-2400N

    
ABB火檢光纖SF810-FO-0-2400N         ABB火檢光纖SF810-FO-G-2800-N

ABB火檢光纖SF810介紹
ABB火焰探測光纖SF810系列，具有多年的研發經驗。
紅外火焰探測器的原理：火焰中有大量可見光和0.9m以上的紅外線。這些波長的光不易被煤塵，水蒸氣和其他燃燒產物吸收，因此適用于檢測煤粉火焰，重油火焰以及惰性氣體含量高的燃料的適當燃燒。紅外火焰檢測通過檢測燃燒火焰發出的紅外線強度和火焰頻率來確定火焰的存在。該探頭使用硫化鉛光電管或硅光電二極管。由于爐膛的火苗在火焰區被*燃燒，因此火苗的頻率通常不超過2HZ。因此，紅外火焰探測器可以通過過濾器電路區分燃燒器火焰和背景火焰。 

ABB flame detection fiber SF810 series, with many years of research and development experience.
Principle of Infrared Flame Detector: There is a large amount of visible light in the flame and infrared rays above 0.9m. These wavelengths of light are not easily absorbed by coal dust, water vapor, and other combustion products, so it is suitable for detecting pulverized coal flame, heavy oil flame, and suitable combustion of a fuel with a large inert gas content. Infrared flame detection determines the presence of flame by detecting the intensity of the infrared rays emitted by the combustion flame and the flame frequency. The probe uses a lead sulfide photocell or a silicon photodiode. Since the furnace flicker is burned in the flame zone, the flame flicker frequency usually does not exceed 2HZ. Therefore, the infrared flame detector can distinguish between the burner flame and the background flame through the filter circuit.

ABB火檢光纖其他常用型號：
ABB SF810-FO-G-2400N
ABB SF810-FO-0-2400N
ABB SF810-FO-G-2800-N
ABB SF810-FO-G-3200-N
ABB SF810-BG-L-3250
ABB SF810-FOC-G-2800 
ABB SF810-FO-G-2600-N
ABB UR600-FO-G
ABB UR600-OGP-F
ABB UR600-OGP-R

如果您有任何關于ABB的相關技術咨詢或者需要產品的相關技術資料與文檔，請隨時致愛澤工業，或者訪問我們將盡全力解決您的問題。